hiltilove.blogg.se - Synology drive tray key

#Synology drive tray key professional#

Pre-installed memory is double, at 8GB (rather than 4GB on the DS920+) and there is an additional eSATA and more ethernet ports.īased on requirements, the DS1520+ may be worth consideration. The main difference between them being that one is a 4-bay unit and the other a 5-bay. Many will draw a comparison between DS920+ and DS1520+ because they are very similar models. Max Internal Capacity: 80TB (5x 16TB HDD).Internal HDD/SSD: 3.5" or 2.5" SATA-III 4x.Hardware Encrypted Engine + Floating Point.CPU Frequency: Quad-Core 2.0 GHz (Turbo 2.7 GHz).Some of Synology’s models allow you to actually see the internal components, this isn’t possible with DS1520+ but the hardware specification is as follows: Once the drive is secure, the tray can be slid back into the chassis to have the SATA connectors marry up with the ports inside the NAS. 2.5 or 3.5 solid state or hard SATA drives are screwed to the. Installing storage into the NAS is simple, the drive just drops into the provided tray in a tool-free manner with the SATA connection ports facing the rear. Like the DS1512+, the 412+ drive trays are plastic, but they cant be key-locked in place. Your Synology NAS comes with a power cable, an Ethernet cable, drive mounting screws, and, if you have a higher end model, it may also come with hot-swap drive bay trays, and a second Ethernet cable (the high end DiskStations support dual network cards for increased network throughput). Now is where he shares tech tips.The HDD trays can host 2.5” and 3.5” drives and DS1520+ can accommodate up to 80TB of storage. He has been a tech enthusiast ever since his dad let him play with computers in the early 80s.

#Synology drive tray key professional#

is an attorney and IT professional living off the grid.

The disks’ positions are numbered as shown below.

Repeat the steps above to assemble the other hard disks you have prepared.

Insert the hard drive tray key into the hard drive tray lock, turn the key clockwise (to the “I” position) to lock the handle of the hard drive tray, and then remove the key.

Press the handle in flush with the front panel to hold the hard drive tray in place.

Otherwise, the hard disk might not be able to function properly.

Important: Make sure the tray is pushed in all the way.

Insert the loaded hard drive tray into the empty hard drive bay.

Place the hard disk in the blue area (shown below) of the hard drive tray, turn the tray upside down, and then tighten the screws to secure the hard disk.

For 2.5” Hard Disk: Remove the fastening panels from the sides of the hard drive tray. Synology DS418 comes with a new 64-bit quad-core processor, delivering excellent data transfer speed and large storage volume management.

Then insert the fastening panels to secure the hard disk in place.

Place the hard disk in the hard drive tray. For 3.5” Hard Disk: Remove the fastening panels from the sides of the hard drive tray. Synology rx415 Chapter 2 Setting Up 13 4 Press the handle in ush with the front panel to hold the drive tray in place 5 Insert the drive tray key into the.Load the hard disk in the hard drive tray.Pull the hard drive tray handle in the direction as indicated below to remove the hard drive tray.Press the lower part of the hard drive tray to pop out the handle.Insert the hard drive tray key into the hard drive tray lock, turn the key counter-clockwise to unlock the handle of the hard drive tray, and then remove the key.